Epson LabelWorks Safety Kit User Manual page 31

■
If you are using the AC adapter, make
sure that it is securely connected to both
the wall outlet and the product.
■
Adjust the contrast as described on
page 25.
The display turns off
■
The power turns off automatically if the
product is idle for more than 5 minutes.
■
If an incorrect button sequence is
entered, the display may flicker or turn
off for an instant.
Nothing prints
■
Make sure text has been entered.
■
Replace the tape cartridge if necessary.
■
Check the display for an error message
and perform the suggested solution.
■
Replace the batteries with new ones,
or use the optional AC adapter
(C52CB73020).
■
Make sure the rear cover is closed.
Characters do not print properly
■
Make sure the tape cartridge is correctly
seated.
■
Clean the print head.
■
Change the font (sometimes symbols do
not print properly when certain fonts are
selected).
Printing stops in the middle of text
■
Install a new tape cartridge.
■
Replace the batteries or use the optional
AC adapter (C52CB73020).
Saved labels are gone
■
Make sure you have not accidentally
deleted the label
■
If the product is reset, all of the
previously entered text will be deleted.
.
Solving Problems | 29