GE JP200 Owner's Manual page 12

Optional i nstallationoverGEundersink dishwasher
modelGSM2100. ( if
n ot insta//ingthecooktop over a dishwasher, go to thenextpage)
Read theseinstructionscompletely and carefully.
Dimensionsand Clearancesfor OptionalInstallation
A:ZlVg B:161y" C:fgfm_ " D:15_i " E: ISVd
15. 20f_ " G: I@_,_ H:3" J: 2_ Min. K... 3J//"Min.
I I
i I 1¾"Min.
i clearanceto
sidewall _ I _[_
Unitandcutout d imensions Floor
Thiscounterunit mustbe installed with _?econtrol
knobstoward the frontedge of the countertop.
Counter spacemustbeprovided forinstallation of
thecounter u nit Whenchoosing Melocation oftbe
conlrtop anddishwasher, consider the following:
• When installing over a dishwasher, cooktop
modelsJP200,JP201 andJP202 are only
approved for installation over GE Undersink
Dishwasher model GSM2100. Install the
dishwasher using the separate installation
instructions packed with the dishwasher.
• The cooktop should be easy to reach and
lighted with natural 5ght during the day.
• To eliminate the risk of burns or fire by
reaching over heated surface units, cabinet
storage space located above the surface units
should be avoided. If cabinet storage space
is to be provided, the risk can be reduced by
installing a range hood that projects
horizontally a minimum of S" beyond the
bottom of the cabinets. Cabinets installed
above the counter unit may be no deeper than
13" and must be at least 30' above the cooktop.
• The cooktop must be centered left to right over
the dishwasher unit.
• To insure accuracy, it is best to make a template
when cutting the opening in the counter. See
the illustration and chart above for all necessary
dimensions.
Thefollowing minimum clearancesmust be
maintained:
• 3¥4"minimum clearance between the front
edge of the counter unit and the fzont edge of
the counter.
• 30" minimum vertical clearance from the
cooktop to the nearest overhead surface.
18 lmrmnum vertacal clearance to adjacent
cabinets.
12