Codes And Ordinances; Note To Consumer - GE Monogram ZEU365ABG Installation Manual

Before you begin--Read these instructions completely and carefully.
IMPORTANT:
Save these instructions for local inspector's use.
IMPORTANT: OBSERVE ALL GOVERNING CODES AND ORDINANCES.
NOTE TO INSTALLER: Be
sure to leave these instructions with the
Consu lneI'.
NOTE TO CONSUMER: Keep
these instructions with your Use and Care
Book for future reference.
I_ This appliance must he properly grounded. See "Electrical Supply", page 4. I
If you have questions concerning the
installation of this product, call the GE
Answer Center :'_Consumer Information
Service at 800.626.2000, 24 hours a day,
7 days a week.
Proper installation is the responsibility of the
installer. Product failure due to imf)roper
installation is not covered under the
GE
Appliance Warranty. See the Use & Care
Guide for warranty information.
If you received a damaged cooktop, you
should contact your dealer.
For Monogram local service in your area,
1-800-444-1845.
For Monogram Service in Canada
1-888-880-3030.
For Monogram Parts and Accessories, call
1-800-626-2002.
CAUTION:
• This cooktop should be installed by a
qualified installer or service technician.
• Do not store items of interest to
children in cabinets above the
cooktop. They could be seriously
burned climbing on the cooktop to
reach them.
• Never use your cooktop for warming or
heating the room. Prolonged use of the
cooktop without adequate ventilation
can be hazardous.
• The cooktop should be easy to reach
and lighted by natural light during the
day.
• Always disconnect the electrical service to
the unit before repairing or servicing the
cooktop. Disconnect the fuse or circuit
breaker. Failure to do so could result in a
dangerous or fatal shock. Know where your
main disconnect switch is located.
Check local building codes for the proper
method of cooktop installation. Local codes
vary. Installation, electrical connections and
grounding nmst comply with applicable
codes. In
the absence of local codes, the
cooktop should be installed in accordance
with National Electrical Code
ANSI/NFPA
70-1990.
Contents
Design Information
Models Available ................................................................................................................................. 3
Dimensions and Clearances .............................................................................................................. 3
Advance Planning .............................................................................................................................. 3
Installation Preparation
Tools & Materials Required ............................................................................................................... 4
Electrical Location ............................................................................................................................. 4
Base Cabinet Heat Clearances .......................................................................................................... 4
Step 1: Cut the Opening .................................................................................................................... 5
Installation
Step 2: Install Cooktop ...................................................................................................................... 6
Step 3: Install Hold-down Brackets ................................................................................................... 6
Step 4: Connect Electrical ................................................................................................................. 7