Attaching A Wall Mount Bracket (Sold Separately) - FUNAI iLO CIWP4206 A Owner's Manual

A
TTACHING A WALL MOUNT BRACKET (SOLD SEPARATELY)
The following is a description of the method for attaching a wall mount to the TV.
When performing this operation, refer to the instruction manual included with the wall mount kit.
# CAUTION
• Any damage caused by incorrectly attempting to mount the TV is not covered under the terms of the
manufacturer's warranty.
• This TV is for use only with the Sanus Systems Model VMPL. Wall Mount. Use with other wall mounts
may result in instability causing possible injury.
1
1
Turn the TV over and place it screen-first onto a
table which has a soft cloth draped over it.
Place the TV in a way so that the stands hang
over the edge of the table.
NOTES:
• Make sure to use a table which can support the
weight of the TV and is larger than the TV.
• Make sure the table is in a stable location.
2
Remove the stands from the TV.
Unscrew the M5 screws indicated by
remove the left and right stands.
NOTE:
• The screws and stands you have removed are neces-
sary for reattachment at a later date. Make sure to
keep them in a safe place.
3
Attach the left and right TV rails to the TV using
the M8 screws included with the wall mount kit.
indicates the position of the screw holes on
2
the TV.
2
HDMI COMPONENT2 COMPONENT1
ANT. IN
Y Y VIDEO1
AUDIO OUT AUDIO
L L L Pb L Pb L
DIGITAL HDMI IN AUDIO AUDIO AUDIO
AUDIO OUT
R R R Pr R Pr R S-VIDEO1
(COAXIAL)
Stands
NOTES:
• Only use the screw holes indicated by
ing the TV.
• For instructions on how to attach the TV rails, refer to
the instruction manual included with the mount wall
kit.
4
Attach the TV to the wall.
NOTE:
• Refer to the instruction manual included with the
, and
1
mount wall when securing the TV to the wall.
* If you want to attach the stands of this TV again,
insert the stand slowly as illustrated below and
drive screws in the 4 threaded holes (
Rear of this TV
AC IN
1
1
for mount-
2
).
1
31
EN