Picture Adjustment - FUNAI iLO CIWP4206 A Owner's Manual

PICTURE ADJUSTMENT

You can select from four default picture color set-
tings. You can also adjust brightness, contrast,
color, tint, sharpness and color temperature set-
tings.
SETUP SETUP
BACK
1
Display the setup screen.
• Press [SETUP].
The following setup screen appears.
2
Select "PICTURE", and press [ENTER] to con-
firm.
• Using [ K / L ], select your desired item and
press [ENTER] to confirm.
Picture Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Reset Settings
Color Temp.
3
Adjust the picture quality.
• Using [ K / L ], select the picture quality you want
to adjust.
Picture Mode
Using [ K / L ], adjust Picture Mode from the
selection, then press [ENTER]. (Standard,
Dynamic, Movie and News)
Picture
Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Reset Settings
Color Temp.
Brightness
Using [s / B], adjust until the darkest parts of
the picture are as bright as you prefer.
s : To decrease brightness
B : To increase brightness
Brightness 30
Adjust
24
EN
SCREEN
MODE
ENTER ENTER
INFO
Dynamic
30
60
36
0
0 0
Neutral
Standard
Dynamic
Movie
News
Move Enter
ENTER
Contrast
Using [s / B], adjust to increase or decrease
contrast.
s : To decrease contrast
B : To increase contrast
Contrast 60
Adjust
Color
Using [s / B], adjust to be brilliant or pale color.
s : To pale
B : To brilliant
Color 36
Adjust
Tint
Using [s / B], adjust to obtain natural skin tones.
s : To red
B : To green
Tint R2
Adjust
Sharpness
Using [s / B], adjust the detail of the picture.
s : To soft
B : To clear
Sharpness 0
Adjust
Reset Settings
Using [ K / L ], select "Reset".
You can reset setting of the Picture Mode you select.
Reset Settings Reset Settings
This function resets the
"Dynamic" setting for Picture Mode
to factory default.
Color Temp.
Using [ K / L ], adjust Color Temperature from the selec-
tion, then press [ENTER]. (Cool, Neutral and Warm)
Picture Picture
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Reset Settings
Color Temp.
• The adjustment bar for picture quality item is
displayed on the screen.
NOTE:
• To move to the normal screen, press [SETUP].
4
To exit the setup, press [SETUP].
Move Enter
ENTER
Move Enter
ENTER
Move Enter
ENTER
Move Enter
ENTER
Cancel
Reset
Cool
Neutral
Warm