Table of Contents
Advertisement
42 INCH
ANALOG / DIGITAL
PLASMA DISPLAY TV
TO RECEIVE DIGITAL/ANALOG SIGNAL, YOU MUST CONNECT ANTENNA.
By changing the screen display mode from time to time,
you can reduce burn-in on screen.
(Refer to "CHANGING THE SCREEN DISPLAY MODE" on page 21.)
IF YOU NEED ADDITIONAL ASSISTANCE WITH SET-UP OR OPERATING AFTER
READING OWNER'S MANUAL, PLEASE CALL TOLL FREE 1-800-474-0045,
OR VISIT OUR WEB SITE AT http://www.funai-corp.com
OWNER'S MANUAL
CIWP4206 A
CIWP4206
HIGH-DEFINITION TELEVISION
Advertisement
Table of Contents
Summary of Contents for FUNAI iLO CIWP4206 A
- Page 1 (Refer to “CHANGING THE SCREEN DISPLAY MODE” on page 21.) IF YOU NEED ADDITIONAL ASSISTANCE WITH SET-UP OR OPERATING AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE 1-800-474-0045, OR VISIT OUR WEB SITE AT http://www.funai-corp.com OWNER'S MANUAL CIWP4206 A CIWP4206...
-
Page 2: Important Safety Instructions
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI- ANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELEC- TRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. -
Page 3: Precautions
PRECAUTIONS • Place your TV in a room with adequate ventilation. • Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight. • Do not place your TV on soft surfaces, such as rugs or blankets. •... -
Page 4: Supplied Accessories
SUPPLIED ACCESSORIES • Owner’s Manual (1EMN22014A) • Remote control unit (NF009UD) • If you need to replace these accessories, please refer to the PART NO. with the illustrations and call our toll free customer support line found on the cover of this manual. •... -
Page 5: Table Of Contents
ONTENTS IMPORTANT SAFETY INSTRUCTIONS ........... . 2 PRECAUTIONS . -
Page 6: Functions
UNCTIONS REMOTE CONTROL, CONTROL AND REAR PANEL FUNCTION SLEEP button Press to activate the sleep timer. POWER button Press to turn the TV on and off. Number buttons Press to select a channel. SETUP button Press to display on-screen menu. buttons s / B / K / L To move left / right / up / down through... -
Page 7: Installing The Batteries
ANT. IN jack Coaxial cable connection for your antenna or cable box. DIGITAL AUDIO OUT (COAXIAL) jack Digital audio coaxial cable connection for decoder or audio receiver. Connect by side Rear of this TV cable to DIGITAL AUDIO IN jack of AUDIO external device. -
Page 8: Preparation For Use
REPARATION FOR USE CONNECTION This section describes how to connect your TV to an antenna, cable box, etc. MAKE SURE YOU HAVE AN ANTENNA. As DTV is only available over the air, you need an antenna to receive a digital signal. NOTE: •... -
Page 9: Connecting Other Devices
CONNECTING OTHER DEVICES [HDMI] 1) High Definition Multimedia Interface (HDMI) uses the latest technology to ensure the signal maintains the highest degree of integrity from source to TV. Both video and audio travel through a single cable. DVD Player with the HDMI output jack NOTES: •... -
Page 10: Component Cable Connection
[COMPONENT CABLE CONNECTION] Offers better picture quality for video devices connected to your TV. Use a component video cable (not included) to connect your TV to external video devices equipped with component video jacks. If you connect to your TV’s COMPONENT1 input jack, connect audio cables to the AUDIO L/R jacks of COM- PONENT1. -
Page 11: Video Connection
[VIDEO CONNECTION] Offers standard picture quality for video devices connected to your TV. When the audio jack of the video device is monaural, connect the audio cable to the audio L input jack. Side of this TV AUDIO VIDEO2 S-VIDEO2 Camcorder Video Game [DIGITAL AUDIO CONNECTION]... -
Page 12: Analog Audio Connection
[ANALOG AUDIO CONNECTION] If you connect this TV to an external analog audio device, you can enjoy stereophonic (2 channel) audio sound. Required audio cable not included. Stereo system CONNECTING THE POWER CABLE Connect the power cord (included) to the TV before connecting it to the power source. ANT. -
Page 13: Initial Settings
NITIAL SETTINGS INITIAL SETUP This section will guide you through your TV’s initial set up which includes selecting a language for your on-screen menu and AUTOSCAN, which automati- cally scans and memorizes viewable channels. INPUT POWER POWER SLEEP SELECT AUDIO STILL SCREEN SETUP... -
Page 14: Channel Settings
HANNEL SETTINGS AUTOSCAN With AUTOSCAN, your TV automatically scans and memorizes your area’s viewable channels. Activate AUTOSCAN when you turn on your TV for the first time, change broadcast sources (e.g. from antenna to CATV), or move your TV to a different broadcast area. -
Page 15: Channel List
CHANNEL LIST This function lets you remove undesired channels from the Channel Registration List. STILL SCREEN SETUP SETUP MODE ENTER ENTER INFO BACK CH RETURN Display the setup screen. • Press [SETUP]. The following setup screen appears. Select “CHANNEL” and press [ENTER] to con- firm. -
Page 16: Antenna Confirmation
ANTENNA CONFIRMATION Displays signal strength for each channel. POWER SLEEP SETUP SETUP ENTER ENTER BACK CH RETURN VOL. MUTE Display the setup screen. • Press [SETUP]. The following setup screen appears. Select “CHANNEL” and press [ENTER] to con- firm. • Using [ K / L ], select “Antenna”. Channel Channel Autoscan... -
Page 17: Language Selection
LANGUAGE SELECTION You can choose English, Spanish, or French as your on screen language. STILL SCREEN SETUP SETUP MODE ENTER ENTER INFO BACK CH RETURN VOL. MUTE Display the setup screen. • Press [SETUP]. The following setup screen appears. Select “LANGUAGE” and press [ENTER] to con- firm. -
Page 18: Watching Tv
ATCHING TV CHANNEL SELECTION Select channels by pressing [CH K/L] found on remote control or on the TV’s control panel, or by pressing [the Number buttons] found on the remote control. INPUT POWER SLEEP SELECT SCREEN SETUP ENTER ENTER BACK CH RETURN CH RETURN VOL. -
Page 19: Still Mode
STILL MODE You can freeze the image shown on the screen. AUDIO STILL STILL SCREEN SETUP MODE Pause the image. • When you press [STILL], the image shown on the screen is paused. Still • The audio is not paused and keeps on reading out. -
Page 20: Accessing External Devices
ACCESSING EXTERNAL DEVICES Use your remote control to access DVD recorders, home audio systems and other external devices when they are connected to your television. POWER SLEEP SETUP ENTER BACK CH RETURN VOL. MUTE Use your remote control to select external com- ponent. -
Page 21: Changing The Screen Display Mode
CHANGING THE SCREEN DISPLAY MODE Each of 4 display modes can be selected in either 4:3 or 16:9 aspect ratios. AUDIO STILL SCREEN SCREEN SETUP MODE MODE ENTER INFO BACK When the broadcast is sending 4:3 video signal... Sidebar (normal) Wide [Sidebar] Sidebar displays a 4:3 picture at its standard... -
Page 22: Screen Information
SCREEN INFORMATION You can display the currently selected channel or other information such as the audio mode on the screen. SETUP ENTER BACK BACK CH RETURN VOL. MUTE In the analog mode, the current channel and the audio mode are displayed. Display the channel number and the audio mode. -
Page 23: Sleep Timer
SLEEP TIMER The Sleep Timer can be set to automatically turn off your television after an incremental period of time. INPUT POWER SLEEP SLEEP SELECT AUDIO STILL SCREEN SETUP MODE ENTER Press [SLEEP] on the remote control to set the Sleep Timer. -
Page 24: Picture Adjustment
PICTURE ADJUSTMENT You can select from four default picture color set- tings. You can also adjust brightness, contrast, color, tint, sharpness and color temperature set- tings. SETUP SETUP ENTER ENTER BACK Display the setup screen. • Press [SETUP]. The following setup screen appears. Select “PICTURE”, and press [ENTER] to con- firm. -
Page 25: Closed Caption
CLOSED CAPTION You can view closed captioning (cc) for TV pro- grams, movies, news, and prerecorded tapes. Closed captions refer to text of dialogue or descrip- tions displayed on-screen for the hearing impaired. STILL SCREEN SETUP SETUP MODE ENTER ENTER INFO BACK CH RETURN... -
Page 26: Dtv Closed Caption
DTV CLOSED CAPTION Apart from closed captions, DTV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC. Display the setup screen. • Press [SETUP]. The following setup screen appears. Select “DETAIL” and press [ENTER] to confirm. •... - Page 27 Set each item. • When “User Setting” is set to “On”, you can set the following items. • CC style set by “User Setting” will be displayed. • Using [ K / L ], select the item you want to set. •...
-
Page 28: V-Chip
V-CHIP You can block certain programming inappropriate for children. This block can be released by entering a password. POWER SLEEP SETUP SETUP ENTER ENTER BACK Display the setup screen. • Press [SETUP]. The following setup screen appears. Select “DETAIL” and press [ENTER]. •... - Page 29 Set “MPAA Rating”. • Using [ K / L ], select the rating. • Press [ENTER] and set to “View” or “Block”. V-Chip V-Chip NC-17 PG-13 BACK Select View/Block Back ENTER To exit the setup, press [SETUP]. <Selection> <Rating Category Explanations> Mature audience only NC-17 : No one under 17 admitted...
-
Page 30: Hdmi Audio
C New Password Display the “New Password” screen. • Using [ K / L ], select “New Password”. V-Chip V-Chip MPAA Rating TV Rating New Password • Press [ENTER]. Change the password. • Use [the Number buttons] on the remote con- trol and enter the NEW 4-digit password. -
Page 31: Attaching A Wall Mount Bracket (Sold Separately)
TTACHING A WALL MOUNT BRACKET (SOLD SEPARATELY) The following is a description of the method for attaching a wall mount to the TV. When performing this operation, refer to the instruction manual included with the wall mount kit. # CAUTION •... -
Page 32: Miscellaneous
ISCELLANEOUS TROUBLESHOOTING GUIDE Before calling for service, please refer to the following information. Symptom No power No picture or sound No color Sound OK, picture poor Picture distorted Weak picture Lines or streaks in picture Picture blurred Remedy • Be sure the power cord is connected to outlet. •... - Page 33 Symptom Ghosts in picture Bars on screen Picture rolls vertically Different color marks on screen Poor reception on some channels Picture OK, sound poor Burn-in on screen No reception of digital signals Channel changes automatically Remote Control doesn’t work Remedy •...
- Page 34 Problems with Closed Caption Feature Misspelled captions are displayed. Captions are not entirely displayed, or captions are delayed behind the dia- logue. Captions are displayed as a white box. No caption is displayed in the Closed Caption-supported program. No caption is displayed when playing the videotape containing captions.
- Page 35 •IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills and other electrical appliances. •GHOSTS: Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected from tall buildings, hills or some other objects.
-
Page 36: Glossary
GLOSSARY ATSC Acronym that stands for Advanced Television Systems Committee and the name of the digital broadcasting standards. Aspect ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the screen is almost square);... -
Page 37: Specifications
PECIFICATIONS GENERAL SPECIFICATIONS Television System: ATSC NTSC-M TV Standard Closed Caption System: §15.119/FCC (Analog CC) §15.122/FCC (Digital CC) Channel Coverage (ATSC/NTSC) VHF: 2 ~ 13 UHF: 14 ~ 69 CATV: 2 ~ 13, A ~ W, W+1 ~ W+94, A-5 ~ A-1, 5A Tuning System: Channel frequency synthesized tuning system... -
Page 38: Warranty
FUNAI CORP. will repair this product, free of charge in CANADA in the event of defect in materials or workmanship as follows: DURATION : PARTS : FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. -
Page 39: Audio Output Connection
QUICK SET UP GUIDE D’INSTALLATION RAPIDE Some cables here are not included with the plasma display TV. Certains des câbles présentés ici ne sont pas fournis avec le téléviseur écran plasma. S-VIDEO (OR VIDEO) CONNECTION CONNEXION S-VIDÉO (OU VIDÉO) AUDIO OUTPUT CONNECTION CONEXION DE SORTIE AUDIO HDMI ANT. -
Page 40: Hdmi Connection
S-VIDEO (OR VIDEO) CONNECTION CONNEXION S-VIDÉO (OU VIDÉO) Camcorder CAMÉSCOPE DVD Player LECTEUR DVD 1. Owner’s Manual 2. http://www.funai-corp.com 3. 1-800-474-0045 Printed in Malaysia HDMI OUT AUD I O C O M P O N E N T O U T...