Changing The Screen Display Mode - FUNAI iLO CIWP4206 A Owner's Manual

CHANGING THE SCREEN DISPLAY MODE

Each of 4 display modes can be selected in either
4:3 or 16:9 aspect ratios.
7 8
- 0
SETUP
BACK
When the broadcast is sending 4:3 video
signal...
Sidebar
(normal)
Wide
[Sidebar]
Sidebar displays a 4:3 picture at its standard
4:3 size. Sidebars will be displayed on the right
and left edges of the screen.
[Full]
Full displays a 4:3 picture at a 16:9 size, with
horizontal elongation necessary to fill the
screen.
[Cinema]
Cinema displays a 4:3 picture at a 16:9 size,
with less horizontal elongation necessary to fill
the screen because a little bit of the top and
bottom edge of the screen will be cut off.
[Wide]
Wide displays the center of the picture as original
size and the outer sides of the picture will be
elongated. The size of the picture will depend on
the original signal.
AUDIO
9
STILL
SCREEN SCREEN
MODE MODE
ENTER
INFO
Full
Cinema
1
Press [SCREEN MODE], to switch the TV
aspect ratio.
2
Press [SCREEN MODE] repeatedly until the
normal screen displays.
NOTES:
• Some programs may not offer all display mode options.
• By changing the screen display mode from time to time, you
can reduce burn-in on screen.
When the broadcast is sending 16:9 video
signal...
Full
(normal)
Expand
[Full]
A picture is displayed at 16:9 size as it is.
[Zoom]
Zoom displays a 16:9 picture without changing
its horizontal and vertical ratio, at its maximum
size.
[Cinema]
Cinema displays a 16:9 picture with vertical
elongation.
[Expand]
Expand displays a 16:9 picture with horizontal
elongation.
Zoom
Cinema
21
EN