Channel List; Manual Register - FUNAI iLO CIWP4206 A Owner's Manual

CHANNEL LIST

This function lets you remove undesired channels
from the Channel Registration List.
- 0
SETUP SETUP
BACK
CH RETURN
1
Display the setup screen.
• Press [SETUP].
The following setup screen appears.
2
Select "CHANNEL" and press [ENTER] to con-
firm.
• Using [ K / L ], select "Channel List".
Channel Channel
Autoscan
Channel List

Manual Register

Antenna
• Press [ENTER].
3
Select the channel you want to remove.
• Using [ K / L ], select the channel.
Channel List
Channel List
Highlight channels for
Ch Up/Down key selection.
Ch Select ENTER
• Press [ENTER] to highlight the channel select-
ed for removal. You will not be able to select the
channel again using [CH K / L ].
• To reactivate the removed channel, highlight it
and press [ENTER].
• When you remove a major channel, you
remove its minor channels, too.
NOTE:
• The channel with "DTV" indicated on the display is ATSC,
otherwise the channel is NTSC.
4
To exit the setup, press [SETUP].
STILL
SCREEN
MODE
ENTER ENTER
INFO
DTV 6
DTV 6
DTV DTV 8 8
9
9
27
DTV DTV 48 48
58
58
DTV 67
BACK
Watch/Skip Back
MANUAL REGISTER
This function lets you manually add channels not
memorized due to poor broadcast strength during
AUTOSCAN.
1 1 2 2
4 4 5 5
7 7 8 8
- - 0 0
SETUP SETUP
BACK
1
Display the setup screen.
• Press [SETUP].
The following setup screen appears.
2
Select "CHANNEL" and press [ENTER] to con-
firm.
• Using [ K / L ], select "Manual Register".
Channel
Channel
Autoscan
Channel List
Manual Register
Antenna
• Press [ENTER].
3
Select the channel you want to add.
• Using [the Number buttons], select your
desired channel.
Manual Register Manual Register
For Analog channels,
select a channel to register
using number keys.
For Digital channels,
you must perform Autoscan function.
Ch Change
• Select "Register" with [ENTER].
4
To exit the setup, press [SETUP].
NOTES:
• If set up completes successfully, "Registered to the Channel
List" is displayed.
• If Video 1 is being used, set up will not be completed suc-
cessfully and "Unavailable" will be displayed on the screen.
3 3
6 6
AUDIO
9 9
STILL
SCREEN
MODE
ENTER ENTER
INFO
11
Register
BACK
Back
15
EN