GE JP200 Owner's Manual And Installation Instructions page 12

Optionalinstallationover GEundersinkdishwasher
model GSM2100.(if n ot _ t_ll_ th_ _ookto_ over _d_hw_h_r, _o toth_ _t m_)
Read these instructions completely and carefully.
Dimensions and Clearancesfor Optional Installation
1¾" Min.
clearanceto
__"_,_._,_ sidewall
Floor
Unitandcutoutdimensions
C: 19WId" D: 15WId" E: 161/a "
H:3" J: 2" Min. K: M/l" Min.
This counter unit must be installed with the control
knobs toward the
front edge of the countertop.
Counter space must be provided for installation of
the counter unit. When choosing the location of the
cooktop and dishwasher, consider the following:
• _'hen installing over a dishwashei; (ooktop
models ]P2OO,JP20] andJP202 are only
approved fiw installation over GE Undei_ink
Dishwasher model (;SM2100, Install the
dishwasher using the separate ii_stallafion
instructions packed with the dishwashei:
• Tile cooktop should be easy to reach and
lighted with natuI_ll light during tile day.
• To eliminate the risk of burns or fire by
reaching over heated surfl_ce milts, cabinet
storage space located above tile SUlti_ce units
should be avoided. If cabinet storage space
is to be provided, tile risk can be reduced
bv
installing a range hood that projects
hoI_izontally a Inilfim mn of 5" beyond tile
bottoln of tile cabinets. Cabinets installed
above tile counter unit inav be no deeper than
l 3" and In ust be at least 30" above tile cooktop.
• Tile cooktop
nmst be centered
lett to fight
oxer the dishwasher trait.
• To insure accuracy, it is best to make a
template when cutting the opening in the
countei: See the illustration and chart above
ti)r all necessary dimensions.
Thefollowingm&imumclearancesmustbe
maintaine&
• 3:_" inii]ilnuln clearance between tile front
edge of the counter trait and the fl'ont edge
of tile co/intei:
• 30" minim um vertical clearance fl'om tile
cooktop to tile nearest overhead stiFf,ice.
• 18" nfillinlulll vertical clearance to a(!iacent
cabinets.
12