Dell Inspiron 4100 Service Manual page 18

1 top cover display assembly
2 center control cover
3 thermal cooling assembly
4 hybrid cooling fan
5 microprocessor module
6 system board
7 right speaker/antenna assembly 15 palm rest assembly
8 fan guard
Palm Rest Inserts
1. Save and close any open files, exit any open programs, and shut down the computer.
2. If the computer is connected (docked) to a docking device, undock it.
3. Keep the display open and tilt the computer back so that you can access the bottom of the computer.
4. Slide and hold the latch release on the right side, and remove any device installed in the module bay.
5. Slide and hold the latch release on the left side, and remove any battery installed in the battery bay.
6. Locate the orange palm-rest removal buttons. Firmly press the buttons with the eraser end of a pencil (or a dull utensil smaller than your finger) to
release the palm rests.
7. Remove the palm rests.
9 bottom case assembly
10 memory module cover
11 module bay device
12 main battery
13 hard drive
14 left speaker/antenna assembly
16 keyboard