FUNAI FDRV-90E Owner's Manual page 103

Symptom
Remote control
The remote control does not function.
Others
The unit does not operate properly.
The disc tray does not open when you
press OPEN/CLOSE A button.
"Repairing" appears on the display.
Repairing
Error message
Disc Error
--- Please eject the disc. ---
Playback feature may not be
available on this Disc.
Region Error
--- Please eject the disc. ---
Playback is not authorized in your
region.
Parental Lock On
--- Please eject the disc. ---
The current selected parental level
Prohibits playback.
Recording Error
This program is not allowed
to be recorded.
Recording Error
This program is not
recordable in Video mode.
Recording Error
Can not record on this disc.
Recording Error
This program is not allowed to
be recorded on this disc.
Recording Error
This disc is protected and not
recordable.
Others
Troubleshooting (cont'd)
Remedy
• Batteries are weak.
• There are obstacles between the remote control and the unit.
• The remote control is far from the unit.
• There are no batteries in the remote control.
• Turn on the unit.
• The remote control is not pointed at the remote sensor on the
unit.
• Press the DVD or VCR button, whichever you need. Then, try
again.
• When static electricity, etc., causes the unit to operate
abnormally, unplug the unit and then plug it in again.
• It may take a few seconds for the disc tray to open after you
have recorded or edited a disc.
• This is because the unit is adding disc data to the disc.
• If there is a power failure or unplugging during recording,
finalizing, formatting or editing, a Repairing process will begin
automatically just after turning the unit on again.
It may take several minutes up to about four hours.
Cause
Unplayable disc is inserted
in the DVD recorder.
Playback is not authorized
because the region code of the
DVD video disc you inserted
is different.
The current selected parental
level in the SETUP Menu
prohibits playback.
The recording function encountered
the copy prohibited program.
You are trying to record the copy-
once program onto the DVD-RW
disc in Video mode or the DVD-R
disc.
You are trying to record onto the
disc which is unrecordable, or the
disc status prevents recording.
You are trying to record a copy-
once program onto a DVD-RW
disc which is not compatible with
CPRM.
You are trying to record on to the
protected disc which is set in the
Disc Setting Menu.
Solution
Insert the standardized disc which
bear the marks on page 46.
Insert the DVD-Video disc with
region codes 1 or ALL.
Check the "Parental Lock" setting
(pages 96-97).
You cannot record copy prohibited
programs.
Set "DVD-RW Recording Format"
to "VR mode" (page 30-31).
Insert the recordable disc, and
ensure the disc status satisfies
the recording requirements
(pages 28-45).
Insert a ver.1.1 CPRM compatible
DVD-RW disc (page 29).
Release the disc protect setting
in the Disc Setting menu (page 45).
103