Page 1
INSTRUCTION MANUAL Location of controls FUNCTION SWITCH (14) CD PLAY/PROGRAM LED (RADIO,TAPE/OFF,CD) INDICATOR BAND SWITCH (15) CD REPEAT LED INDICATOR (3) FM ANTENNA (16) AC SOCKET (4) CD DOOR BATTERY DOOR (5) TUNING KNOB FM STEREO LED INDICATOR BASS BOOST SWITCH (19) CASSETTE COMPARTMENT (7) CD SKIP/SEARCH FORWARD (20) CASSETTE RECORD BUTTON...
(28) STEREO HEADPHONE JACK (29) VOLUME CONTROL KNOB AC OPERATION Before operation please make sure that the voltage on the set corresponds to the voltage of your local area. Unravel the AC line cord; insert one end into the AC jack on the set and the other end into a standard AC outlet. Remarks: 1.In case of malfunction due to electrostatic discharge (ESD).
CASSETTE OPERATION Tape Playback Depress the STOP/EJECT BUTTON to open the cassette door. Insert a cassette tape into the CASSETTE COMPARTMENT and push the cassette door to close. Slide the FUNCTION SWITCH to TAPE position. Depress the PLAY BUTTON. Adjust the VOLUME CONTROL KNOB to your desired listening level. To stop the tape, depress the STOP/EJECT BUTTON.
Page 4
5. To stop recording temporarily, press the PAUSE BUTTON. To continue the recording, press the PAUSE BUTTON once again. 6. Press the STOP/EJECT BUTTON to stop recording. 7. When the tape runs to its end, the cassette operation will be stopped automatically.
Page 5
When the REPEAT BUTTON is pressed once, the REPEAT LED INDICATOR will light and flash continuously. This single track of music will be repeated. REPEAT ALL: When the REPEAT BUTTON is pressed twice, the REPEAT LED INDICATOR will stay lit. The whole disc can be played continuously. 3.
Page 6
be cancelled automatically. To cancel the P rogrammed play mode, simply open the CD DOOR or press the CD STOP BUTTON once during the CD “STOP” mode. STEREO HEADPHONE JACK (phones/earphones not included) For private listening, insert the plug of a stereo headphone into the STEREO HEADPHONE JACK and adjust the VOLUME CONTROL KNOB accordingly.
Page 7
Instructions on environment protection Do not dispose of this product in the usual household garbage at the end of its lifecycle; hand it over at a collection point for the recycling of electrical and electronic appliances. The symbol on the product, the instructions for use or the packing will inform about the methods for disposal.
Need help?
Do you have a question about the TCD-28 and is the answer not in the manual?
Questions and answers