WARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION Use of controls or adjustments or performance of procedures CLASS 1 LASER PRODUCT other thanthose specified herein may result in hazardous KLASSE 1 LASER PRODUKT LUOKAN 1 LASER LAITE KLASS 1 LASER APPARAT...
POWER SUPPLY AC ~ IN AC power operation Battery power operation Connect one end of the mains lead to the (AC 1. Open the battery compartment lid by pushing ~IN) socket and the other end to an AC outlet. down on the tabs. 2.
O P E R A T I O N O F R E M O T E H A N D S E T Operation Button Name Stop button ( Press the Stop key to the stop the disc playing. Volume up button Press the VOLUME key to Increase the volume.
O P E R A T I O N O F R E M O T E H A N D S E T ( c o n t i n u e d ) Operation Button Name There are 3 deferent function mode, CD\TAPE and Function button TUNER.
GENERAL OPERATION To open and close the power Compact discs - Both 8cm and 12cm discs can be played in this unit. NOTE: Place only one disc at a time in the CD compartment. - Only discs bearing the logo as shown can be played in this unit.
COMPACT DISC OPERATION CD PLAY Playback will start automatically. To control the sound. PUSH OPEN Press and release repeatedly Push to open Label facing up PUSH OPEN Push down. Press STOP . 2 TO CD To OFF...
PAUSE 1. Press the PLAY/PAUSE button during play. Play will temporarily stop, and PAUSE indicator will show. STOP PLAY/PAUSE 2. Press the PLAY/PAUSE button again to resume play. Pause indicator will go off. TRACK SKIP 1. Press and release the SKIP button repeatedly during play to quickly locate the beginning of a track.
REPEAT PLAY REPEAT Press REPEAT The REPEAT indicator will show. To repeat the entire disc. 8802 Press REPEAT before or during play (or programmed play). STOP PLAY/PAUSE To cancel repeat play Press REPEAT again STOP PLAY/PAUSE The REPEAT indicator will go off.
Page 12
PROGRAMMED PLAY (Setting only by remote handset) With programmed play, up to 20 tracks on a disc can be memorized and played in any Press the SKIP button. order. For example to program track 7, 12 2 0i2 1 In stop state, Press PROGRAM button, the MEMORY indicator will flash.
RADIO OPERATION 3 Tune in a station. STOP PLAY/PAUSE In tuner mode, when the TUNING button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receivable 1 To RADIO. broadcast station. 4 To control the sound.
Page 14
CASSETTE TAPE OPERATION PLAYBACK Press to temporarily stop the tape during playback or recording. Press it again to continue. To quickly wind the tape backward To quickly wind the 1 TO TAPE. tape forward To TAPE Press STOP/EJECT once to stop the tape. Press again to remove the cassette.
Page 15
WARNING RECORDING Recording copyright material without permission of the copyright owners is (A) Recording from usually an infringement. If you wish to the built-in radio re-record copyright material, permission from the copyright owner is necessary. OHAYO does not approve of, and cannot be held responsible for, any unlawful of this machine.
Page 16
Safeguards against accidental erasure (C) Recording from To protect side A, break out tab (1). To protect side B, break out tab (2). a compact disc NOTE: A cassette with the erase guard tabs removed cannot be erased or used for recording and the REC button cannot be depressed.
MAINTENANCE Cleaning the unit Cleaning the tape heads Clean the outside of the unit with a clean soft When dust or reddish-brown oxide builds up on cloth, moistened with lukewarm water. Do not the tape deck heads, pinch roller and capstan, use solvents such as benzene or thinner.
Need help?
Do you have a question about the TCD-50 and is the answer not in the manual?
Questions and answers