Removing and Installing Parts: Dell XPS 400 Service Manual
NOTE:
If you are adding a floppy drive, see
Removing a Floppy Drive
1. Follow the procedures in
2. Remove the
computer
3. Disconnect the power and floppy drive cables from the back of the floppy drive.
4. Disconnect the other end of the floppy-drive cable from the system board
5. Pull the sliding plate to the right and hold in place.
6. Slide the floppy drive out of the floppy drive bay.
file:///T|/htdocs/systems/xps400/sm/parts.htm[8/3/2012 3:11:45 PM]
"Installing a Floppy
"Before You
Begin."
cover.
Drive."