Removing The Bezel; Replacing The Bezel - Dell Vostro 410 Service Manual

Back to Contents Page
Bezel
Dell™ Vostro™ 410 Service Manual
Removing the Bezel
Replacing the Bezel
CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
Removing the Bezel
1. Follow the procedures in Before Working on Your
2. Remove the computer cover (see Removing the Computer Cover).
3. With the computer set upright, find the four cover bezel grips inside the chassis along the left edge of the cover. Gently bend the bezel grips outward to
release the left side of the cover from the chassis.
4. Rotate the left edge of the cover outward until the bezel clamps on the right side of the cover are free of the clamp slots.
1 bezel clamp (3)
3 bezel grip (4)
5. Set aside the bezel in a secure location.
Replacing the Bezel
1. With the computer set upright, align and insert the bezel clamps into the bezel clamp slots along the right edge of the front panel.
Computer.
2 bezel