Canon EOS REBEL T5I Instruction Manual page 32

Changing the Autofocus Method (AF Method)
Focus the subject.
® Aim the AF point over the subject and
press the shutter button halfway.
_,, When focus is achieved, the AF point
will turn green and the beeper will
sound.
_,, If focus is not achieved, the area
frame will turn orange.
_ Take the picture.
® Check the focus and exposure, then
press the shutter button completely to
take the picture (p.146).
_,,When the camera does not focus the desired target subject with
automatic AF point selection, switch the AF method to zone selection or
[FlexiZone - Single], and refocus.
Depending on the aspect ratio setting, the number of AF points will differ.
At [3:2], there will be 31 AF points. At [1:1] and [4:3]. there will be 25 AF
points. At [16:9], 21 AF points. Also, at [16:9]. there will be only three
zones.
;_ For movie shooting, there will be 21 AF points (or 25 AF points if
[640x480] is set) and three zones (or 9 zones if [640x480] is set).
FlexiZone' Single: AF[]
Since only oneAF pointis usedto focus, you can focus the target subject.
AF point
Display the Live View image.
¢_ Press the <_11> button.
_y,, T he Live View image will appear on
the LCD monitor.
_y,, T he AF point <[_> will appear. During
movie shooting, if [Movie servo AF]
is set to tEnable], the AF point will be
displayed in a larger size.
162