Canon EOS REBEL T5I Instruction Manual page 102

Easy Wireless Flash Shooting
Select [Built=in flash settings].
® Select [Built-in flash settings], then
press <_>.
5 Select [EasyWireless].
® Under [Built-in flash], select
[EasyWireless], then press <_)>.
Set [Channel].
® Set the transmission channel (1-4) to
the same one as the slave unit.
Take the picture.
® Set the camera and take picture in
the same way as with normal
shooting.
S xit the wireless flash shooting.
® For [Built-in flash], select
[NormaIFiring].
Setting [E,TTL !1 meter.] to [Evaluative] is iecommended.
¢, Even though the fidng of the builtqn flash is disabled wheu
[EasyWireless] is set, it wi!! still fire a small flash to €0ntre! the slave unit.
Depending on shooting conditions, the flash fired to control the slave unit
may appear in the Picture.
® Firing a test flash is not possible with the slave unit.
232