Table of Contents
Advertisement
Chapter 3 • Keypad Configuration
The following describes the default key assignments applied to Denso terminals used in
Twin Client advanced mode. The figures and tables identify the key assignments by
terminal model and emulation.
Adhesive decals that reflect the configurations described in this chapter are available for
Denso terminals in each of the emulations (3270, 5250, and VT).
The keypad figures in this section are designed to be of use without color. The
convention for describing the effect of modifier keys is as follows:
KEYTOP
Above the keytop is the key value for each of the available modifier keys. In this
example, the Control (C), Alphabet (ALP), Shift (SF) keys are the modifiers.
In the example figure above, the keystroke generated in the un-modified state is a 7.
The programmable function key + is generated by pressing the SF modifier key before
pressing the 7 key, and a | is generated by using the ALP modifier key.
Modifier
Alpha (ALP)
Shift (SF)
Control (C)
Supported Equipment Manual
C
refers to the characters printed on the top of the key by the manufacturer.
•
March, 2006
KEYTOP
APL
SF
Key Function
Lock Mode
Hold down in combination with key
One key sequence
+
|
7
3-1
Advertisement
Table of Contents
