Dell Latitude E6410 Service Manual page 5

NOTE: When Setup is running, this field has no effect—Setup works in the Fn Key Only mode.
Default setting: Fn Key Only.
Allows you to select one of two methods to use pointing devices.
Mouse/Touchpad
Default setting: Touchpad-PS/2.
Allows you to enable or disable the Num Lock LED when the computer boots.
Numlock LED
Default setting: Enabled.
Defines how the BIOS handles the USB devices. USB emulation is always enabled during POST.
USB Emulation
Default setting: Enabled
Allows you to use the <Scroll Lock> key on an external PS/2 keyboard the same way you use the <Fn> key on the computer's
internal keyboard.
Fn Key Emulation NOTE: USB keyboards cannot emulate the <Fn> key if you are running an ACPI operating system such as Microsoft®
Windows® XP. USB keyboards will only emulate the <Fn> key in non-ACPI mode (for example., when you are running a DOS).
Default setting: Enabled.
Allows you to enable or disable the Fast Boot feature. The following options are available:
Fast Boot
Default setting: Minimal
Used in conjunction with iAMT 4.0. Allows users to initiate contact with a management console while residing outside of the
corporate infrastructure (i.e. remote location, behind a firewall or NAT, etc.) Use the check box to enable or disable this feature.
Intel® Fast Call for Help
Default setting: Disabled
Virtualization Support
Option Description
Specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by Intel
Virtualization Technology.
Virtualization
Default setting: Enabled.
Specifies whether a Virtual Machine Monitor (VMM) can utilize the additional hardware capabilities provided by Intel
Virtualization Technology for Direct I/O.
VT for Direct I/O
Default setting: Disabled.
Specifies whether a Measured Virtual Machine Monitor (MVMM) can utilize the additional hardware capabilities provided by Intel
Trusted Execution Technology. Virtualization Technology and Virtualization Technology for Direct I/O must be enabled to use
this feature
Trusted Execution
Default setting: Disabled.
Wireless
Option
Wireless Switch
Wireless Devices
Maintenance
Option Description
Displays your computer's Service Tag. If for some reason the Service Tag was not already set, you would be able to use this
field to set it.
Service Tag
If a Service Tag has not been set for this computer, the computer will automatically bring up this screen when you enter the
BIOS. You will be prompted to enter the Service Tag.
Asset Tag Allows you to create a system Asset Tag. The field can only be updated if the Asset Tag is not already set.
System Logs
Option Description
BIOS Events Allows you to view and clear BIOS POST events. It includes the date and time of the event as well as the LED code.
Allows you to view the diagnostic results from Dell Diagnostics and PSA. It includes the time and date, the diagnostic and
DellDiag Events
version which was run and the resulting code.
Thermal Events Allows you to view and clear thermal events. It includes the date and time as well as the name of the event.
Power Events Allows you to view and clear power events. It includes the date and time of the event as well as the power state and reason.
Serial Mouse — Disable the integrated touch pad when an external Serial mouse is present.
l
PS/2 Mouse — Disable the integrated touch pad when an external PS/2 mouse is present.
l
Touchpad-PS/2 — Leave the integrated touch pad enabled when an external PS/2 mouse is present.
l
Minimal — Boot quickly unless the BIOS has been updated, memory changed, or the previous POST did not complete.
l
Thorough — Do not skip any steps in the boot process.
l
Auto — Allow the operating system to control this setting (this works only when the operating system supports Simple
l
Boot Flag).
Description
Allows you to determine the wireless devices that will be controlled by the wireless switch: WWAN, WLAN, and
Bluetooth®.
Allows you to enable or disable the following wireless devices: WWAN, WLAN, and Bluetooth.