Dell Studio 1555 Service Manual page 31

module and reinstall it.
NOTE: If the memory module is not installed properly, the computer may not boot.
1 tab
CAUTION: If the base cover is difficult to close, remove the module and reinstall it. Forcing the base cover to close may damage your computer.
3. Replace the base cover (see
4. Slide the battery into the battery bay until it clicks into place, or connect the AC adapter to your computer and an electrical outlet.
5. Turn on the computer.
As the computer boots, it detects the additional memory and automatically updates the system configuration information.
To confirm the amount of memory installed in the computer, click Start
Back to Contents Page
2 notch
Replacing the Base Cover).
® Help and Support® Dell System Information.