Display Hinges; Removing The Display Hinges; Replacing The Display Hinges - Dell Studio 1555 Service Manual

3. Replace the four screws (two on each side of the display panel) to secure the display brackets to the display panel.
4. Connect the camera cable to the connector on the camera.
5. Align the screw holes on the display bracket with the corresponding screw holes and guide pins on the display cover and gently lower the display panel
into place.
6. Replace the four screws that secure the display panel to the cover.
7. Replace the display bezel (see
8. Replace the display assembly (see
Display Hinges

Removing the Display Hinges

1. Follow the instructions in Before You
2. Remove the display assembly (see
3. Remove the display panel without removing the display bracket (see
4. Remove the two screws (one on each side) securing the display hinges to the display cover.
5. Remove the display hinges.
1 screws (2) 2 hinge (2)

Replacing the Display Hinges

1. Follow the instructions in Before You
2. Align the holes on the hinges with the holes on the display cover and replace the two screws (one on each side) that secure the display hinges to the
display cover.
3. Replace the display panel (see
4. Replace the display assembly (see
Back to Contents Page
Replacing the Display Bezel).
Replacing the Display Assembly).
Begin.
Removing the Display Assembly).
Begin.
Replacing the Display Panel).
Replacing the Display Assembly).
Removing the Display Panel).