Technical Specifications - Dell Dimension 4600 Series Service Manual

Back to Contents Page

Technical Specifications

Dell™ Dimension™ 4600 Series Service Manual
Microprocessor
System Information
Expansion Bus
Memory
Drives
Ports and Connectors
Video
Microprocessor
Microprocessor type
Level 1 (L1) cache
Level 2 (L2) cache
System Information
System chip set
DMA channels
Interrupt levels
System BIOS chip
System clock
Expansion Bus
Bus types
Bus speed
PCI connectors
PCI connector size
PCI connector data width
(maximum)
AGP
Memory
Architecture
Memory connectors
Memory capacities
Minimum memory
Maximum memory
Memory type
Drives
Externally accessible
Internally accessible
Audio
Network
Controls and Lights
Power
Physical
Environmental
Intel® Pentium® 4 that runs at
2.26, 2.4, 2.533, 2.66, 2.8, or 3.06
GHz internally and 533 MHz
externally, or 2.4, 2.6, 2.8, 3.0, 3.2,
or 3.4 GHz internally and 800 MHz
externally
8 KB first-level
512-KB or 1-MB pipelined-burst,
eight-way set associative, write-
back SRAM
Intel 865PE or 865G
eight
24 APIC mode
4 Mb (512 KB)
533- or 800-MHz data rate
PCI
PCI: 33 MHz
three
120 pins
32 bits
AGP 1X, 4X, 8X
Dual Channel DDR SDRAM
Four
128-, 256-, 512-MB or 1-GB
128-MB DDR SDRAM
NOTE: Between 32 and 64 MB of
system memory may be allocated to
support graphics, depending on
system memory size and other
factors.
4 GB
PC2700 (333-MHz) or PC3200 (400-
MHz) DDR SDRAM
(non-ECC)
two 5.25-inch bays
one 3.5-inch bay
Two bays for 1-inch–high IDE hard
drives