Dell Dimension 4600C Service Manual page 27

4. If you are removing the card permanently, install a filler bracket in the empty card-slot opening.
If you need a filler bracket, see "Contacting Dell" in your Owner's Manual.
NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust
and dirt out of your computer.
5. Lower the retention arm and press it into place.
6. Close the computer cover.
7. Attach the computer stand
NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
8. Connect your computer and devices to electrical outlets, and turn them on.
9. Remove the card's driver from the operating system.
Back to Contents Page
(optional).