D-Link Ethernet Broadband Router DIR-100 User Manual page 69

Ethernet broadband router

Hide thumbs Also See for Ethernet Broadband Router DIR-100:

Table of Contents

Configure Windows NT 4.0 for DHCP

1. Open the Control Panel menu, and then double-click the Network icon.

2. In the Network dialog box, click the Protocols tab.

3. In the Protocols tab, select TCP/IP, and then click Properties.

4. In the Microsoft TCP/IP Properties dialog box, click the Obtain an IP address automatically option.

5. Click OK twice to confirm and save your changes, and then close the Control Panel.

Your computer is now ready to use the Router's DHCP server.

DIR-100 Ethernet Broadband Router

Table of Contents