System > Port Setting - D-Link 24-Port 10/100Mbps PoE Web Smart Switch with 4-Port 10/100/1000Base-T and 2-Port Combo SFP DES-1228P User Manual

System > Port Setting
In the Port Setting page, the status of all ports can be monitored and
adjusted for optimum configuration. By selecting a range of ports
("From Port" and "To Port"), the Speed can be set for all such ports,
by clicking Apply. To refresh the information table to view the latest
Link Status and Priority, press the Refresh button.
Speed: Fiber connections can operate in Forced Mode settings
(1000M Full), Auto, or Disable. Copper connections can operate in
Forced Mode settings (100M Full, 100M Half, 10M Full, 10M Half),
Auto, or Disable. The default setting for all ports is Auto. 100Base-FX
Fiber supports 100M full/half force mode.
NOTE: Be sure to adjust port speed settings appropriately after
changing connected cable media types.
Figure 25 – System > Port Setting
3 7
3 7