Table of Contents
Advertisement
Quick Links
PLEASE READ
This manual is provided as a free service
by Projector.com.
We are in no way responsible for the
contents of the manual. We do not guarantee
its accuracy and we do not make any claim
of copyright. The copyright remains the
property of their respective owners.
ABOUT PROJECTOR.COM
Projector.com (http://www.projector.com) is
your review and buying guide resource for
DLP and LCD video projectors.
Visit the site to read the latest projector
news and reviews, read and comment on
projector specifications, download user
manuals and much more.
Advertisement
Chapters
Table of Contents
Related Manuals for 3M Multimedia Projector MP8730
Summary of Contents for 3M Multimedia Projector MP8730
- Page 1 PLEASE READ This manual is provided as a free service by Projector.com. We are in no way responsible for the contents of the manual. We do not guarantee its accuracy and we do not make any claim of copyright. The copyright remains the property of their respective owners.
- Page 2 MP8730 Multimedia Projector Operator's Guide MP8730 Projecteur multimédia Guide de l'opérateur MP8730 Multimedia-Projektor Benutzerhandbuch Proyector de Multimedia MP8730 Manual del Usuario MP8730 Proiettore Multimediale Manuale dell'operatore MP8730 Bruksanvisning for multimediaprojektor MP8730 Multimedia Projector Gebruiksaanwijzing...
-
Page 3: Table Of Contents
Display Lamp Operation Hours ................... 16 Replacing the Lamp ..................... 16 Section 7: Troubleshooting ..................17 Sympton/Solution Table ....................17 Message/Solution Table ....................17 Service Information ..................... 17 Section 8: Accessories ....................18 Appendix: Technical Information ................19 ™ Multimedia Projector MP8730 © 3M 1998... -
Page 4: Safeguards
16. The projection lamp contains mercury. Always dispose of it in a proper manner according to local regulations. SAVE THESE INSTRUCTIONS The information contained in this manual will help you operate and maintain your 3M MP8730 Multimedia Projector. © 3M 1998 ™... -
Page 5: Warranty
Thank you for choosing 3M Multimedia Projector equipment. This product has been produced in accordance with 3M's highest quality and safety standards to ensure smooth and trouble free use in the years to come. For optimum performance, please follow the operating instructions carefully. We hope you will enjoy using this high performance product in your meetings, presentations and training sessions. -
Page 6: Section 1: Unpack
RS-232 control cable ..(1) 1.3 Keep Your Packaging Materials Important Save the shipping box and packing materials in the event the MP8730 should require shipping to a 3M Service Center for repair. 1.4 What Next? After you have unpacked the MP8730 system and identified all the parts, you are ready to set up the projector. -
Page 7: Section 2: Product Description
ZOOM, FOCUS, MENU buttons Kensington™ lock Remote Control Sensors (front/back) Height Adjustment Feet Terminal Connection Panel Lens shutter (open/closed) S-Video, Vidoe, Audio inputs Projection lens RGB1 and RGB2 inputs Cooling fan exhaust 10. Carry handle ™ Multimedia Projector MP8730 © 3M 1998... -
Page 8: System Setup
For some laptop computers you may need to disable the internal pointing device (IPD). This is done through the BIOS level set up of the particular machine, or it could be listed in a "Utilities" program group, i.e., "Toshiba ™ ™ Utilities ," or "Thinkpad Features ." © 3M 1998 ™ Multimedia Projector MP8730... -
Page 9: Remote Control Transmitter Identification
C A U T I O N LASER RADIATION DO NOT STARE INTO BEAM WAVE LENGTH: 670 nm MAX. OUTPUT: 1mW CLASS II LASER PRODUCT Laser Aperture Battery Cover (Use AA or R6P batteries) Figure 2.3 Remote Control Buttons ™ Multimedia Projector MP8730 © 3M 1998... -
Page 10: Section 3: Basic Operations
Do not turn off the POWER SWITCH before pressing the STANDBY/ON button. After the STANDBY/ON button is pressed, the fan rotates for about 1 minute to cool the projector. CLOSE Close the LENS SHUTTER . Push up on the lens cover switch to close. OPEN Disconnect cables. © 3M 1998 ™ Multimedia Projector MP8730... -
Page 11: Adjustments And Functions
CANCEL To reset a single item from SETUP menu T I N • Select the adjustment item (brightness, contrast...) • Press the RESET button. Only the selected item resets. Figure 4.2 Default Settings ™ Multimedia Projector MP8730 © 3M 1998... -
Page 12: How To Use Foot Adjusters
Do not unlock the foot adjusters if the projector is not supported. If the foot adjusters do not lock completely, turn the foot adjusters slightly before locking. Front view unlock lock Foot adjusters Side view Figure 4.3 Height Adjustment © 3M 1998 ™ Multimedia Projector MP8730... -
Page 13: Setup
TINT cannot be adjusted with a PAL or M-PAL video signal input. • TINT, COLOR and SHARPNESS cannot be adjusted with an RGB signal input. • V. POSIT, H. POSIT, H. PHASE and H. SIZE cannot be adjusted with a VIDEO signal input. ™ Multimedia Projector MP8730 © 3M 1998... -
Page 14: Input
Selects the RGB2 terminal RGB2 Video1 System Selects the video signal Select the VIDEO1 or format Auto, NTSC, PAL, VIDEO2 terminal Video2 SECAM, NTSC, 4.43, M-PAL Selects the TEST PATTERN. Test Pattern (Start up Screen) © 3M 1998 ™ Multimedia Projector MP8730... - Page 15 MIRROR V : INTERT Inverts the picture vertically. H&V : INVERT Inverts the picture horizontally and vertically. BLANK Selects the blank color. REVEAL Selects reveal speed. MESSAGE Turn ON or OFF on-screen messages. ™ Multimedia Projector MP8730 © 3M 1998...
-
Page 16: Opt
(English, French, German, Spanish, Italian, Norwegian, Dutch) AUTO OFF Selects how long projector will stay on, if no input is detected. — Select to disable this function. START UP Enable/Disable Startup Screen. TURN ON © 3M 1998 ™ Multimedia Projector MP8730... -
Page 17: Section 5: Maintenance
4. After filter dries completely, re-install the air filter and replace the air filter door. Note If air flow is restricted due to dust accumulation on filter, the projector may shut down due to over heating. ™ Multimedia Projector MP8730 © 3M 1998... - Page 18 Retaining screws: Use a screwdriver to unscrew the lamp module retaining screws. (2) Note There are three lamp module screws that must be loosened. These Figure 6.1 Lamp Door screws are self-containing screws that cannot be removed from the lamp module. © 3M 1998 ™ Multimedia Projector MP8730...
-
Page 19: Section 6: Lamp
Insert the hinge tabs on the left side of the lamp access door, then close and tighten the retaining screws to secure the door. 8730-33A Figure 6.2 Lamp Module Note Reset the lamp operation hours. See section 6.2 for details. ™ Multimedia Projector MP8730 © 3M 1998... -
Page 20: Section 7: Troubleshooting
10 minutes. 7.3 Service Information For product information, product assistance, service information, or to order accessories, please call: In U.S. or Canada: 1-800-328-1371 In other locations, contact your local 3M Sales office. © 3M 1998 ™ Multimedia Projector MP8730... -
Page 21: Section 8: Accessories
The contents of this manual are subject to revision without prior notice. 3M assumes no responsibility for the infringement of special rights of a third party or other rights that may arise out of the information contained in this manual. -
Page 22: Appendix: Technical Information
VIDEO : RCA Jack terminal terminal AUDIO : RCA Jack terminal Input/Output terminal RGB input/output RGB signal : D-sub 15pin (Female) signal terminal AUDIO : Stereo mini jack Control terminal D-sub 15pin (Male) © 3M 1998 ™ Multimedia Projector MP8730... -
Page 23: Dimensions
A.2 Dimension ™ Multimedia Projector MP8730 © 3M 1998... -
Page 24: Projector-To-Screen Distance
1 inch. This is due to variations in the manufacture of the lens. If you are close to one of the endpoints you should verify with your unit that the image is the proper size at the proper distance. © 3M 1998 ™ Multimedia Projector MP8730... -
Page 25: Connection To The Video Signal Terminal
Signal input terminal / output terminal Video signal (Red) Video signal (Green) Ground Video signal (Blue) Ground SDA (DDC) Horizontal/Composite sync signal Ground (for R) Vertical sync signal Ground (for G) SCL (DDC) Ground (for B) ™ Multimedia Projector MP8730 © 3M 1998... - Page 26 MAC 16" mode = switch 2, 5 and 6 are ON (Example of 16 inch mode) Note 2: Some input sources may not be displayed properly because they are not compatible with the projector. © 3M 1998 ™ Multimedia Projector MP8730...
-
Page 27: Indicator Status
Let projector cool 20 minutes. Check air flow and filter. TEMP indicator call your dealer Blinks red Cooling fan not operating *When the LAMP indicator lights or blinks, turn the power off. If the problem persists, contact your dealer. ™ Multimedia Projector MP8730 © 3M 1998... -
Page 28: Connection To The Control Signal Terminal
PS/2 mouse Projector Computer Mini Din 6pin DATA DATA D-sub 15pin (Female) SEL0 PS/2 port ADB mouse Projector Computer Mini Din 4pin SDATA (POWER ON) D-sub 15pin (Female) ADB port © 3M 1998 ™ Multimedia Projector MP8730... - Page 29 RS-232 Control Cable (not included with basic packout) This cable is used to directly control the projector without using the Remote Control or Operator's Panel. Projector Computer D-sub 9pin (male) D-sub 15pin (Female) SEL0 RS-232 Cable ™ Multimedia Projector MP8730 © 3M 1998...
- Page 30 The XX is the same as in the Ask code. Errors: For an error, the projector will reply with the same code that was sent but with a 0 in the first nibble. © 3M 1998 ™ Multimedia Projector MP8730...
- Page 31 H. Size 00 00 02 06 - 1E 08 is wide end of scale 00 00 1E 08 V. Position 00 00 00 00 - 7F 01 is down 00 00 7F 01 ™ Multimedia Projector MP8730 © 3M 1998 A.10...
- Page 32 Red on bit 3 - 0 No change bit 3 - 1 Change Reveal Stop Reveal down Reveal right X in down and right is 0 - 7 with 7 being the fastest © 3M 1998 ™ Multimedia Projector MP8730 A.11...
- Page 33 United States and Canada from 7:30 a.m. to 5:30 p.m. (CST) or visit our Internet Website. Printed on 50% recycled wastepaper, 3M Austin Center 3M Canada 3M Mexico, S.A. de C.V. 3M Europe including 10% post-consumer Building A145-5N-01 P.O.
- Page 34 PLEASE READ This manual is provided as a free service by Projector.com. We are in no way responsible for the contents of the manual. We do not guarantee its accuracy and we do not make any claim of copyright. The copyright remains the property of their respective owners.