Manual Mode - Teleflex TFX320 Operation Manual

3. Rotate the Range Knob to adjust the zoom
preview bar. Moving the zoom preview bars
closer together increases the display resolution
in the zoomed window; moving them further
apart decreases display resolution, but allows
more area around the bottom to be viewed.
The indicators disappear after several seconds
with no adjustment. The 320 continues to follow
the bottom using the new range. Any change
made to the zoom preview bars is remembered
until the 320 is powered off.
M M
ANUAL ODE
Manual Mode turns off the automatic bottom
tracking leaving control of the depth range to the user. Both the upper and lower
depth ranges can be adjusted to show the bottom in great detail or any other
desired depth. When first switched to manual mode, the 320 defaults to the
current automatic depth range; however, after the manual depth ranges have
been set, the 320 uses the new settings until it is
powered off.
Manual Mode works best in areas of relatively
flat bottom or if you are trolling slowly. It is also
ideal for displaying a small area of the overall
depth range in great detail if you are looking for
fish at a specific depth.
To manually adjust the depth ranges follow
these steps:
1. Make sure the 320 is operating in Manual
Mode.
2. Push the Range Knob. An adjustment
indicator appears at the location of the lower
Depth Range indicating it is ready for adjustment.
USING THE 320 SERIES
MODES OF OPERATION
Adjustment Indicator

Manual Mode

13