NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by periodically touching unpainted metal on the computer.
V i d e o G r a p h i c s B o a r d
8-mm screws (3)
Removing the Video Graphics Board
Follow the instructions in
1
Remove the keyboard.
2
Remove the
hinge
cover.
3
Detach the
display flex cable
4
card.
Remove the three 8-mm screws that secure the video graphics board.
5
Separate the video graphics board from the system board connector.
6
Replacing the Video Graphics Board
Align the three screw holes and press down firmly on the word "Dell"
1
to seat the board in its connector.
"Preparing to Work Inside the
from the strain relief and the graphics
Computer."
Re m ov i n g a nd Re p l ac i n g Pa rt s
39