Remove the four 4-mm screws located across the top of the bezel.
2
Use a scribe at the indentations to pry out the two plastic screw covers
3
located at the bottom of the bezel.
Remove the two 4-mm screws located at the bottom of the bezel.
4
Separate the bezel from the display-assembly top cover.
5
The bezel is secured to the display assembly top cover with plastic tabs
around the sides. Use a plastic scribe to help separate the bezel from
the top cover.
Removing the Display Panel
Remove the
hinge
cover.
1
Detach the
display flex cable
2
card.
Remove the
display assembly
3
Remove the 4-mm screw securing the plastic flex cable mounting
4
bracket to the top cover assembly.
Remove the six 3-mm screws (three on each side) from the right and
5
left sides of the panel.
Lift the display panel and flex cable out of the top cover assembly.
6
Disconnect the flex cable from the two connectors (a ZIF and a
7
standard connector) on the display panel assembly.
from the strain relief and the graphics
bezel.
Re m ov i n g a nd Re p l ac i n g Pa rt s
31