Dell Latitude C800 Service Manual page 32

F l e x C a b l e
pull loop
flex cable
Remove the 6-mm screw that secures the display flex cable to the
2
strain relief, and then use the pull loop to remove the display flex cable
from the graphics card.
NOTICE: When reconnecting the flex cable, press down on both ends of the
connector, not in the middle. Pressing the middle of the connector can damage
fragile components.
Open the display and, from the back of the computer, remove the two
3
screws labeled with a "circle D" that secure the display assembly to the
bottom case assembly.
With the display in an upright position, lift the display assembly from
4
the bottom case assembly.
6-mm screw
strain relief
Re m ov i n g a nd Re p l ac i n g Pa rt s
29