Table of Contents
Advertisement
Steps
1. Place the power-adapter port into the slot and adhere the power-adapter port cable on the system board.
2. Connect the power-adapter port cable to the system board.
3. Place the power-adapter port bracket on the power-adapter port and align the screw holes on the power-adapter port
bracket to the screw holes on the palm-rest and keyboard assembly.
4. Replace the two screws (M2x4) that secure the power-adapter port bracket to the palm-rest and keyboard assembly.
Next steps
1. Install the
rear
cover.
2. Install the
base
cover.
3. Follow the procedure in
System board
Removing the system board (NVIDIA GeForce RTX
3060/3070/3070 Ti graphics card)
Prerequisites
1. Follow the procedure in
CAUTION:
Before removing the system board, give sufficient time for the heat sink to cool down to avoid
injury.
NOTE:
Replacing the system board removes any changes that you have made to the BIOS using the BIOS setup
program. Make the appropriate changes again after you replace the system board.
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
rear
cover.
5. Remove the
solid-state
6. Remove the
wireless
card.
38
Removing and installing components
After working inside your
Before working inside your
drive.
computer.
computer.
Advertisement
Table of Contents
