Clarity XLC2 User Manual page 30

XLC2
Troubleshooting
TALK button is blinking red (twice every 2 seconds)
Handset batteries are low on charge; return the handset to
the base to recharge the batteries
VISUAL RINGER is blinking red (twice every 5
seconds)
The handset is out of range, or the power to the base is
unplugged; return the handset to the usable area, and check
the power adapter connections on the base unit.
TALK button is blinking green (fast pace) and
VISUAL RINGER is backlit red
The base is trying to locate the handset; press TALK to end
the FIND/paging process and return the handset to the base.
RINGER does not work
• Make sure the RINGER button on the handset is set to ON,
and the SILENT button on the base is not lit red yet.
• Make sure you are in the usable range of the base station.
• Make sure the handset batteries are fully charged.
TALK button is backlit orange during a call
The OSA function is enabled - see page 25 for details.
The TALK button lights up as per the settings below:
• green when the phone is in use, non-Boost mode;
• red when the phone is in use, BOOST function is engaged;
• orange when the OSA function is active;
• blinks green during incoming ring or when the base is
paging the handset (FIND function is engaged) - along with
the visual ringer
• blinks green (slower) during the memory programming
process
E
N
G
L
I
S
H
27