Video Card: Dell Inspiron XPS and Inspiron 9100 Service Manual
Back to Contents Page
Dell™ Inspiron™ XPS and Inspiron 9100 Service Manual
Before performing the following procedures, read the safety instructions
in your Owner's Manual.
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or
by periodically touching an unpainted metal surface (such as the back panel) on the computer.
To avoid damaging the system board, you must remove the main battery before you
begin working inside the computer.
If you ordered a video card with your computer, it is already installed. To remove and replace a video
1. Follow the instructions in
2. Remove the left, right, and center
3. Remove the keyboard.
4. Remove the
5. Remove the
6. Remove the four M2.5 x 6-mm screws from the video card.
7. Gently pull up the video card to remove it.
The video card heat sink is part of the video card assembly.
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA...ok/Inspiron/9100/9100_SERVICE_MANUAL/video.htm (1 of 2)6/21/2004 1:16:08 AM
"Preparing to Work Inside the