Dell Inspiron 9100 Service Manual page 55

Display Assembly and Display Latch: Dell Inspiron XPS and Inspiron 9100 Service Manual
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by
touching an unpainted metal surface on the computer.
NOTICE: To avoid damaging the system board, you must remove the main battery before you
begin working inside the computer.
1. Follow the instructions in
2. Remove the display.
3. Remove the display
4. Remove the M2 x 3-mm ground screw that attaches the display-panel ground wire to the back
display cover.
5. Remove the eight M2 x 3-mm screws from each side of the display panel.
6. Lift the display panel out of the display cover.
1 display-panel ground wire
2 M2 x 3-mm ground screw
3 M2 x 3-mm screws (8)
file:///I|/SERVICE%20MANUALS/DELL%20MANUALS/LA.../Inspiron/9100/9100_SERVICE_MANUAL/display.htm (7 of 10)6/21/2004 1:16:06 AM
"Preparing to Work Inside the
bezel.
Computer."