Dimmer Control - Clarion VXZ766 Owner's Manual

Setting the method for title scroll
Set how to scroll in CD-TEXT, MP3/WMA
TITLE.
• The factory default setting is "ON".
1. Press and hold the [DISP] button for 1
second or longer to switch to the display
adjust mode.
2. Move the [ ] / [
"SCROLL".
3. Turn the [ROTARY] knob to select "ON" or
"OFF".
ON:
Scrolls automatically.
OFF:
Scrolls just 1 time when the title was changed or
you press and hold the [TITLE] button for 1
second or longer.
4. Press the [DISP] button to return to the
previous mode.

Dimmer control

You can set the dimmer control.
• The factory default setting is "ON".
1. Press and hold the [DISP] button for 1
second or longer to switch to the display
adjust mode.
2. Move the [ ] / [
"DIMMER".
3. Turn the [ROTARY] knob to select "ON" or
"OFF".
4. Press the [DISP] button to return to the
previous mode.
Adjust Mode
Anti-theft indicator
The red Anti-theft indicator is a function for
detering theft. When the DCP is removed from
the unit, this indicator blinks.
• The factory default setting is "OFF".
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [ ] / [
3. Turn the [ROTARY] knob to select "ON" or
"OFF".
4. Press the [ADJ] button to return to the
previous mode.
] lever to select
] lever to select
] lever to select "LED".
Setting the low pass filter
• This function can only be adjusted when the
subwoofer output is set to "ON" and the speaker
system is set to "5.1ch". For details on how to set
the subwoofer, refer to the subsection "Turning
on/off speakers" (P. 36) in the section
"Changing Initial Settings such as Menu
Language, etc.".
• This function cannot be adjusted when as follows:
"Pro Logic" is set to "ON", the speaker system is
set to "5.1ch", DVD/DTS-CD is being played.
• The factory default setting is "THROUGH". If the
speaker system is set to "5.1ch", the factory
default setting is "50Hz".
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [ ] / [
LPF".
3. Turn the [ROTARY] knob to select the setting.
Each time you turn the [ROTARY] knob, the
setting changes in the following order:
THROUGH ➜ 50Hz ➜ 80Hz ➜ 120Hz
4. Press the [ADJ] button to return to the
previous mode.
Setting the amplifier bypass circuit
• The factory default setting is "OFF".
1. Press the [ADJ] button to switch to the adjust
mode.
2. Move the [ ] / [
CNCL".
3. Turn the [ROTARY] knob to select "ON" or
"OFF".
ON:
Uses with connected AMP.
OFF:
Uses with inside AMP.
4. Press the [ADJ] button to return to the
previous mode.
OPERATIONS
] lever to select "SW
] lever to select "AMP
41
VXZ766