Led Board - Compaq Evo N200 Maintenance And Service Manual

Removal and Replacement Procedures
3. Remove the three black TM2 × 4 screws 1 that secure the
keyboard to the top cover and base enclosure (Figure 5-7).
4. Swing the back edge of the keyboard up and forward 2 and
rest the keyboard on the top cover.
5. Release the ZIF connector 3 to which the keyboard cable is
connected and disconnect the keyboard cable 4 .
6. Remove the keyboard.
Figure 5-7. Removing the Keyboard
Reverse the above procedure to install the keyboard.

5.9 LED Board

LED board
1. Prepare the computer for disassembly (Section 5.3).
5–12
LED Board
Spare Part Number Information
Maintenance and Service Guide
251631-001