Fujitsu Connectivity Peripherals Point 1600 Installation Manual page 43

15. Apply the cover label provided with the cradle module to the inside of the cradle module as shown
in Figure 2-15 on page 2-23. (This label covers access holes in the cradle module that are not used in
this assembly.)
16. Ensure that the cradle module is properly aligned as shown in Figure 2-21. There should be no gap
between the cradle module and the mounting plate.
No Gap
Figure 2-21. Checking Cradle Module Alignment
Installing the Wall-Mount Cradle
No Gap
2-27