Fujitsu Connectivity Peripherals Point 1600 Installation Manual page 34

utilize these ports is determined by BIOS settings. Ensure that BIOS options are properly configured for
the ports that you intend to use.
Port
Serial Port A
Serial Port B
Parallel Port
Floppy Disk
Drive Port
*
Mouse Port
(on portable
port expander)
Video Port
DC Input
Keyboard Port
*
Mouse Port
(on cradle
module)
* Because of its modular design, the port replicator is equipped with two mouse ports. Only
one mouse device should be connected at a time.
2-18 Assembling and Installing Connectivity Peripherals
Table 2-4. High-Connectivity Cradle Connectors
This connector can be used to connect an external device with a serial interface
such as a modem. This is a fully-functional RS232-C serial port.
This connector can be used to connect an external device with a serial interface.
Note the following:
1) This port provides only the Rx and Tx (receive and transmit) signals of the
RS232-C interface. 2) When this port is enabled, the IrDA port on the pen tablet is
disabled.
This connector can be used to connect a device with a parallel interface such as a
parallel printer.
This connector can be used to connect the Fujitsu FMWFD2 floppy disk drive.
This connector can be used to connect a PS/2-style mouse. When used with the
Point 1600 pen tablet, this connector can be connected to either a PS/2-style
keyboard or mouse.
This connector allows you to connect an external SVGA monitor.
Point 1600 pen tablet users: Note that an external monitor and the pen tablet
display screen cannot be viewed simultaneously.
This connector can be used to connect the AC adapter or auto adapter.
This connector can be used to attach a PS/2-style keyboard.
This connector can be used to connect a PS/2-style mouse.
Description