Confirming External Power Is Supplied - Fujitsu Connectivity Peripherals Point 1600 Installation Manual

Confirming External Power Is Supplied

All connectivity peripherals (except for the portable port expander) supply power to the pen tablet when
the AC adapter is properly connected. To confirm that external power is supplied, place the pen tablet in
the connectivity peripheral and observe the Charge Status light on the pen tablet. The Charge Status light
should either flash once or turn on continuously (depending on the percent of full charge in the pen
tablet's battery pack) when the pen tablet is initially inserted in the connectivity peripheral. Figure 2-24
shows the status lights on the pen tablet.
MIC
Figure 2-24. Status Lights on the Pen Tablet
Confirming External Power Is Supplied
Built-in
Microphone
Power
HDD Access
Charge Status
Low Battery
2
2-31