Fujitsu Connectivity Peripherals Point 1600 Installation Manual page 41

Push
Tighten
Figure 2-17. Attaching Keyboard Tray Assembly to Mounting Plate (Left Side)
Tighten
Figure 2-18. Attaching Keyboard Tray Assembly to Mounting Plate (Bottom)
13. Fasten the cradle module to the mounting plate using the two (size #6) screws provided with the
wall-mount cradle, shown in Figure 2-15 on page 2-23. To ensure proper alignment of the cradle
module, push the cradle module toward the wall while you tighten the screws.
Installing the Wall-Mount Cradle 2-25