Rack Features - Bosch SHE53T55UC Operating Information Manual

Rack Features
Flip Tines
The racks consist of tines that can be folded down
depending on what you may need to load in the
rack. To fold down, grasp the folding tine and
release from notch. Push folding tine downward to
desired position as shown in Figure 1.
Figure 1
Manual Adjustable Upper Rack (model dependent)
Remove the empty upper Figure2
rack by pulling it out of the
dishwasher until it can be
lifted upward as show in
Figure 2. Pull the rack up
and out until the rollers are
completely free of the roller
guides.
Reinsert the rack with the
other set of rollers on the
roller guides as shown in Figure 3.
Figure 3
3-Step RackMatic ® (model dependent)
Figure 4
The height of the upper rack can be adjusted in 3
steps to create more space. Before lowering or
raising, ensure the rack is completely empty.
1 Pull the top rack out of the dishwasher until
it stops.
2 To lower the rack, push the lever inward.
3 To raise the rack, hold the basket on the sides
of the upper rack and lift up.
Note: Before pushing the top rack into the dishwasher, ensure the rack height
is the same on both sides. If the height is not the same on both sides, the dish-
washer door will not shut and the top rack spray arm will not connect to the
water inlet. Figure 5
Cup Shelves (model dependent)
The shelf and the space underneath can
be used for small cups or for larger serv-
ing utensils.
10