Error Displays - Clarion CZ201A Owner's Manual

DISC Player
Problem
Disc cannot be
loaded.
Sound skips or is
noisy.
Sound is bad when
power is first turned
on.
USB Devices
Problem
USB device cannot
be inserted.
USB device is not
recognized.
No sound heard with
the display "No File"
shown.
Sound skips or is
noisy.

7. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.
Take the measures described below to solve the problem.
Display
ERROR 3
ERROR 5
If an error display other than the ones described above appears, press the [RESET] button. If
the problem persists, turn off the power and consult your store of purchase.
* When the [RESET] button is pressed, frequencies of radio stations, titles, etc. stored in
memory are cleared.
20
Cause
Another disc is already loaded.
There is an object installed inside the
unit.
Compact disc is dirty.
Compact disc is heavily scratched or
warped.
Condensation may form on the internal
lens when the car is parked in a humid
place.
Cause
The USB device has been
inserted with wrong direction.
The USB connector is broken.
The USB device is damaged.
Connectors are loose.
No MP3/WMA file is stored in the
USB device.
MP3/WMA files are not encoded
properly.
Cause
Disc is inserted incorrectly.
The disc format is not supported.
This is a failure of deck's mechanism.
Measure
Eject the disc before loading the new one.
Remove the object inside the unit.
Clean the compact disc with a soft cloth.
Replace with a compact disc with no
scratches.
Let dry for about 1 hour with power on.
Measure
Reversing the connection direction of the USB
device, try it again.
Replace with a new USB device.
Disconnect the USB device and reconnect. If the
device is still not recognized, try replacing with a
different USB device.
Store these files properly in the USB device.
Use MP3/WMA files encoded properly.
Measure
Eject the disc then reload it properly.
Try another disc.
Consult your store of purchase.