Installing A Child Seat With Latch - Honda 2011 Element Owner's Manual

Installing a Child Seat
Installing a Child Seat with
LATCH
LOWER ANCHORS
Your vehicle is equipped with
LATCH (Lower Anchors and Tethers
for CHildren) at the rear seats.
The lower anchors are located
between the seat-back and seat
bottom, and are to be used only with
a child seat designed for use with
LATCH.
The location of each lower anchor is
indicated by a small button above the
anchor point.
44
MARKS
To install a LATCH-compatible child
seat:
1. Remove both anchor covers by
pulling forward.
2. Make sure there are no objects
near the anchors that could
prevent a secure connection
between the child seat and the
anchors.
ANCHOR COVER
Rigid-type
3. Place the child seat on the vehicle
seat, then attach the seat to the
lower anchors according to the
child seat maker's instructions.
Some LATCH-compatible seats
have a rigid-type connector as
shown above.