Table of Contents
Advertisement
Lights
Replacing a Front Parking/Turn
Signal Light Bulb
1. Open the hood.
2. Remove the socket from the
headlight assembly by turning it
one-quarter turn counterclockwise.
3. Remove the bulb from the socket
by pushing the bulb in and turning
it counterclockwise until it
unlocks.
204
4. Install the new bulb in the socket
by pushing the bulb in and turning
it clockwise until it locks.
5. Test the lights to make sure the
new bulb is working.
Replacing a Side Turn Signal Bulb
WHEEL ARCH PROTECTOR
SCREWS
1. If you are changing the bulb on the
driver's side, start the engine, turn
the steering wheel all the way to
the left, and turn off the engine. If
you are changing the bulb on the
passenger's side, turn the steering
wheel to the right.
2. Use a Phillips-head screwdriver to
remove the three holding screws,
and remove the wheel arch
protector from the inner fender.
Advertisement
Chapters
Table of Contents
