Selecting A Child Seat - Honda 2011 Element Owner's Manual

Protecting Infants and Small Children, Selecting a Child Seat
Even with advanced front airbags that
automatically turn the passenger's front
airbag off (see page 32), a back seat is
the safest place for a small child.
If it is necessary to put a forward-facing
child seat in the front, move the vehicle
seat as far to the rear as possible, and
be sure the child seat is firmly secured
to the vehicle and the child is properly
strapped in the seat.
Placing a forward-facing child
seat in the front seat can result in
serious injury or death if the front
airbag inflates.
If you must place a forward-facing
child seat in front, move the
vehicle seat as far back as
possible, and properly restrain
the child.
42

Selecting a Child Seat

When buying a child seat, you need
to choose either a conventional child
seat, or one designed for use with
the Lower Anchors and Tethers for
CHildren (LATCH) system.
Conventional child seats must be
secured to a vehicle with a seat belt,
whereas LATCH-compatible seats
are secured by attaching the seat to
hardware built into the rear seats.
Since LATCH-compatible child seats
are easier to install and reduce the
possibility of improper installation,
we recommend selecting this style.
In seating positions and vehicles not
equipped with LATCH, a LATCH-
compatible child seat can be installed
using a seat belt.
Whatever type of seat you choose, to
provide proper protection, a child
seat should meet three
requirements:
1.
The child seat should meet Federal
Motor Vehicle Safety Standard
Look for FMVSS 213 on the
213.
box.
2.
The child seat should be of the
proper type and size to fit the child.
Rear-facing for infants, forward-
facing for small children.