Table of Contents
Advertisement
Lights
SOCKET
LENS
3. Turn on the parking lights and
check that the new bulb is
working.
4. Put the lens back on the socket
until it locks.
5. Slide the right side of the light
assembly into the hole. Push on
the left side to latch the assembly
into place.
208
Replacing a High-mount Brake
Light Bulb
BULB
COVER
1. Open the hatch. Remove the light
assembly cover by pushing in on
the tabs on both sides and pulling
the cover down.
2. Remove the socket from the light
assembly by turning it one-quarter
turn counterclockwise.
TABS
3. Pull the bulb straight out of its
4. Press the brake pedal to make
BULB
SOCKET
socket. Push the new bulb straight
into the socket until it bottoms.
sure the new bulb is working.
Advertisement
Chapters
Table of Contents
