The chart on the right explains the
error messages you may see in the
display while playing a disc.
If you see an error message in the
display while playing a disc, press
the eject button. After ejecting the
disc, check it for damage or
deformation. If there is no damage,
insert the disc again.
For additional information on
damaged discs, see page 128.
The audio system will try to play the
disc. If there is still a problem, the
error message will reappear. Press
the eject button, and pull out the
disc.
Insert a different disc. If the new disc
plays, there is a problem with the
first disc. If the error message cycle
repeats and you cannot clear it, take
your vehicle to a dealer.
Error
Cause
Message
ꐀ HEAT ERROR
High temperature
ꐁ
HOT
Track/File format not
ꐀ
FORMAT
supported
ꐁ
DISC
FOCUS error
BAD DISC
PLEASE
CHECK
ꐀ
OWNER'S
Mechanical error
MANUAL
PUSH EJECT
ꐁ
ERR
BAD DISC
PLEASE
ꐀ
CHECK
Servo error
OWNER'S
MANUAL
ꐀ: EX model
ꐁ: LX model
Disc Player Error Messages
Solution
Will disappear when the temperature returns to
normal.
Current track will be skipped. The next
supported track or file plays automatically.
Press the EJECT button, and pull out the disc.
Make sure it is inserted correctly in the disc
player.
Make sure the disc is not scratched or damaged.
For more information, see page 128.
Press the EJECT button, and pull out the disc.
Check the disc for serious damage, signs of
deformation, excessive scratches, and/or dirt
see page 128.
Insert the disc again. If the code does not
disappear, or the disc cannot be removed,
consult your dealer. Do not try to force the disc
out of the player.
125