Cisco Wireless LAN Controller 4100 Product Manual page 8

Installing the Chassis
Aviso Somente uma equipe treinada e qualificada tem permissão para instalar, substituir ou dar
manutenção a este equipamento.
Advarsel Kun uddannede personer må installere, udskifte komponenter i eller servicere dette
udstyr.
The controller is shipped with rack-mounting ears attached, and rubber feet to mount in a separate bag.
Install the controller as follows:
When you are mounting the controller on a desktop or shelf, adhere the rubber feet to the bottom of
•
the chassis, and place the chassis on any secure horizontal surface.
Note You can remove the rack mounting ears from the controller, if desired.
When you are mounting the controller in an EIA-standard rack, attach the ears to the equipment rack
•
using the factory-supplied screws.
You can remove the rubber feet from the bottom of the controller, if desired.
Note
You have installed the controller chassis.
Cisco 4100 Series Wireless LAN Controllers - Installation and Configuration Guide
8
Installation and Configuration
78-17155-01