Air Cleaning Layers; Installing & Removing - Germ Guardian AC4825 Use And Care Instruction

Air Cleaning System
Improve your indoor air quality with your new Germ Guardian Air Cleaning
®
System. Multiple levels of cleaning include a combination True HEPA filter
that captures allergens, and Charcoal filter to remove odors. UV-C light
technology enhances germ-killing.
Pre-Filter*
Captures initial dust and allergen particles.
Charcoal Filter*
Contributes to the control and prevention of the growth of bacteria, germs and mold.
True HEPA Filter
Captures 99.99% of dust and allergens.
UV-C Light
UV-C light technology works with filters to enhance the elimination of airborne germs
Titanium Dioxide is activated by the UV-C light to decompose remaining odor molecules
caused by smoking, cooking and pets.
*Pre-Filter and Charcoal Filter are combined into one layer that attaches to the HEPA Filter.
OPERATING INSTRUCTIONS
bEFORE OPERATING THE AIR PURIFIER:
1. Carefully remove your air purifier and combination filter (2 parts) from box and bag.
2. Select a firm, level and flat location for the air purifier.
* For proper air flow, locate the unit at least 1 foot from any wall or furniture.
* Make sure none of the grills are blocked.
3. Plug the power cord into a 120V AC outlet.
IMPORTANT
: When moving the air purifier, always lift unit by the carrying handle located on back.
OPERATING THE AIR PURIFIER:
1. Turn the air purifier ON by rotating POWER KNOB clockwise.
2. Upon turning the air purifier ON, the power indicator will be lit and the unit will be in
LOW mode ( ).
3. Rotate the POWER KNOB clockwise further to set the air purifier to MEDIUM mode (
4. Continue to rotate the POWER KNOB clockwise to set the air purifier to HIGH mode (
5. To activate the UV-C Bulb, press the UV button. Press the button again to turn OFF the
UV-C Bulb.
6. To turn the unit OFF, rotate the POWER KNOB counter-clockwise to OFF mode (
E-6

AIR CLEANING LAYERS

UV-C
bulb
UV-C
Metal
Shield
Main Unit
INSTALLING & REMOVING FILTER
).
).
Filter Package includes:
• 1 HEPA Filter
1 Pre-/Charcoal Filter
Filter lasts approximately 6-8 months
•
).
depending on use.
INSTALLING/REMOVING COMbINATION FILTER
1. Turn off and unplug the unit.
Lock & Release
button
2. Press the Lock & Release Button and remove the Rear Cover from the unit.
HEPA
Filter Pre/
Rear Cover
Carbon
with Air
Filter
Inlet Grill
3. Remove the used Combination Filter (Filter B) and dispose of it in the garbage.
*Filter parts must
be removed from
plastic bags
before use.
4. Insert new Combination Filter into the unit. Consult the arrow on the filter for
Before use, attache one (1)
correct installation direction.
Pre-/Charcoal filter to the
HEPA filter to create one
5. Reattach the Rear Cover of the unit and securely latch into place.
complete combination filter.
E-7
E-8
INSTALLING & REMOVING UV-C bULb
INSTALLING & REMOVING UV-C bULb
1. Remove the Rear Cover of the unit by pushing Lock & Release Button (Fig. 1).
FIG. 1
2. After removing the Rear Cover from the unit, remove the Combination Filter (Fig. 2).
FIG. 2
3. After removing the Combination Filter, use a Philips head screwdriver to remove two (2)
screws and detach the UV-C Metal Shield (Fig. 3).
FIG. 3
E-9