GMC 2010 Yukon/Yukon XL Owner's Manual page 355

After stopping the player,
I push Play but sometimes
the DVD starts where I left
off and sometimes at the
beginning.
The auxiliary source is
running but there is no
picture or sound.
Sometimes the wireless
headphone audio cuts out
or buzzes.
If the stop button was
pressed one time, the DVD
player resumes playing
where the DVD was
stopped. If the stop button
was pressed two times the
DVD player begins to play
from the beginning of
the DVD.
Check that the RSE video
screen is in the auxiliary
source mode.
Check the auxiliary input
connections at both
devices.
Check for obstructions, low
batteries, reception range,
and interference from
cellular telephone towers
or by using a cellular
telephone in the vehicle.
Check that the headphones
are on correctly using the
L (left) and R (right) on the
headphones.
I lost the remote and/or the
headphones.
The DVD is playing, but
there is no picture or
sound.
The DVD display error message depends on which
radio is in the vehicle. The video screen can display
one of the following:
load or eject problems.
Displays if the disc is inserted with
the disc label wrong side up, or if the disc is damaged.
Displays if the disc is not from a
correct region.
Displays if no disc is present when
EJECT or DVD AUX is pressed on the radio.
See your dealer for
assistance.
Check that the RSE video
screen is sourced to the
DVD player.
Displays when there are disc
4-133